DTF Transfer Sheets

★ DTF transfers · printed in Easton, PA ★

Press-ready DTF transfer sheets

For crafters, Etsy shops, small brands and teams. Every sheet is 14″ × 16″. Upload your layout, we print it on DTF film with hot-melt powder, and you press full-color designs at home with a heat press. No weeding, no minimums, and local pickup in Easton.

Order sheetsFile checklist
PricesHow it worksFilesPressingFAQ

One simple size

14″ × 16″ sheets

224 square inches per sheet — one full-front design or about 12 left-chest logos.

Full color

Any design, any color

Photos, gradients and fine detail — on light or dark garments. Nothing to weed.

Most fabrics

Cotton, poly & blends

Tees, hoodies, totes, canvas and denim. Press with a standard heat press.

Local

Pickup in Easton

Skip the out-of-state wait: pick up at 925 Northampton St or choose shipping at checkout.

Order in one step

Pick your sheets, upload, check out

All sheets are 14″ wide × 16″ tall, priced at 4¢ per square inch. Buy more and the price per sheet drops. Rush adds $10 per order.

14″ × 16″ sheets Per sheet · fits about… Standard ⚡ Rush
1 sheet $9 · 1 full-front or ~12 left-chest
5 sheets $8 each · 5 full-front or ~60 left-chest
10 sheets $7 each · 10 full-front or ~120 left-chest
25 sheets best value $6 each · 25 full-front or ~300 left-chest

“Fits about” assumes ~11″ full-front designs or ~3.5″ left-chest logos with spacing — mix any sizes you like on each sheet. Need more than 25? Add another pack or ask us for a quote.

No file ready? You can still check out — we’ll email you for artwork. We review every file before printing and contact you if anything looks off.

How it works

From file to finished shirt

Build your sheetLay out your designs on a 14″ × 16″ canvas in Canva, Photoshop, Illustrator or Procreate — or send the designs and ask us to build it.
Upload & payPick how many sheets and your turnaround above, attach your files, and check out.
We print & powderWe check your file, print on DTF film and cure the hot-melt adhesive powder.
Cut & pressPick up in Easton or get it shipped. Trim your designs and press them onto your blanks.

File checklist

Get a clean print every time

  • 14″ wide × 16″ tall at 300 dpi (4200 × 4800 pixels)
  • PNG with a transparent background — no white boxes behind designs
  • Upload designs right-reading (not mirrored)
  • Leave about ¼″ between designs and from the edges so they’re easy to cut
  • Avoid lines thinner than about 1 pt and tiny text under 6 pt
  • Semi-transparent pixels and soft shadows print as faint dots — flatten or remove them
  • Ordering several sheets? Send one file per sheet, or a Google Drive / Dropbox folder link

Pressing & care

At-home heat press basics

  • Press instructions come with every order — follow the card in your package
  • Typical settings: around 300–320°F, 10–15 seconds, medium-firm pressure
  • Pre-press the garment a few seconds to remove moisture and wrinkles
  • Peel the film, then re-press for a few seconds with a cover sheet for extra durability
  • Care: wait 24 hours, wash inside out in cold water, tumble dry low, no fabric softener

New to pressing? Order a single $9 test sheet first and dial in your press before a big run.

Questions

DTF FAQ

What is DTF?

Direct-to-Film: your design is printed on a clear film with white ink underneath, coated with adhesive powder and cured. You heat-press it onto fabric. It gives full-color results on light and dark garments without weeding vinyl.

What size are the sheets?

Every sheet is 14″ wide × 16″ tall (224 square inches). That fits one full-front design up to about 13″ × 15″, or a mix of smaller designs like left-chest logos, sleeve prints and kids’ sizes.

How is DTF priced?

By area: 4¢ per square inch, which is $9 for one 14″ × 16″ sheet. Packs bring the price down: 5 sheets $40 ($8 each), 10 sheets $70 ($7 each), 25 sheets $150 ($6 each). Rush adds $10 per order.

DTF vs. vinyl (HTV) vs. sublimation?

HTV is great for simple one- or two-color text but needs cutting and weeding. Sublimation only works on light polyester. DTF handles full-color art on cotton, polyester and blends, light or dark, with no weeding.

Is there a minimum order?

No. Order a single 14″ × 16″ sheet if you want to test a design or your press settings.

Can you build my sheets for me?

Yes. Upload your individual designs (or a link to a folder), tell us the sizes and quantities in the Notes box, and we’ll lay out the sheets. We’ll contact you if we have questions before printing.

How fast will I get it?

Standard turnaround is confirmed by email when your order is approved. Need it sooner? Choose ⚡ Rush and we move your sheets to the front of the queue and confirm your ready time.

Pickup or shipping?

Choose local pickup at 925 Northampton Street, Easton (Mon–Fri 9AM–4PM) or shipping at checkout. Sheets ship flat.

Would you rather we print the shirts?

We can. For fewer than 5 pieces try DTG Quick Order; for larger runs see our screen printing price guide.

Questions about your file?

Call 610-483-2948 or stop by 925 Northampton Street, Easton, PA · Mon–Fri 9AM–4PM.

Order sheetsAsk us